2018 Infiniti Q60

Infiniti Intelligent Key Battery Replacement

The following instructions will walk through replacing the battery in an Infiniti Intelligent Key FOB.

Tools needed: Small flat head screwdriver and tape. Optionally can use strong fingernails :)

Key FOB battery
Click for larger
Step 1. Open the Intelligent Key
           a. Remove the mechanical key from the Intelligent Key (slide tab and pull up on top of key FOB)
           b. Place a piece of tape on the end of a small flathead screwdriver
           c. Insert the screwdriver into either of the slots shown in Figure to left
           d. Turn the screwdriver until the two cover pieces separate

Step 2. Inspect the inside of the Intelligent Key FOB for damage or corrosion and clean as needed. If key FOB is not working and corrosion is apparent then replacement may be necessary. Only Infiniti can reprogram a new Intelligent Key to your vehicle.

Key FOB battery
Click for larger
Step 3. Remove the battery and replace as needed. Battery should be seated as shown in the Figure to the left.

Disclaimer: The author will not be held responsible nor held liable for any damages due to these instructions. Anyone following these directions are doing so at their own risk. This Documentation may not be distributed without the authors consent.